Cisco Wireless
Overview
Get metrics from the Cisco Wireless server to monitor the performance.
Metrics
| wireless.wlans | The count of WLAN in the network. | Count |
| wireless.controller.memory.used.percent | The percentage of memory used in a wireless controller. | Percentage |
| wireless.controller.ip.address | The IP address of the wireless controller. | String |
| cisco.controller.cpu.temperature.celsius | The CPU temprature of the wireless controller | Count(Temprature in celsius) |
| cisco.controller.802.11b.network.state | The state of the 802.11b band. | String |
| wireless.controller.cpu.percent | The percentage of memory used. | Percentage |
| wireless.clients | The count of devices connected to the network | Count |
| cisco.controller.802.11a.network.state | The state of the 802.11a band. | String |
| wireless.controller.memory.free.bytes | The total amount of free space on the controller memory. | Bytes |
| wireless.wlan | The name of the wlan. | String |
| wireless.controller.memory.used.bytes | The total amount of used space on the controller memory. | Bytes |
| wireless.access.points | The count of access points. | Count |
| wireless.controller.mac.address | The MAC address of the wireless controller. | String |
| cisco.access.point.interface.power.level | The power level of the access point. | Count |
| cisco.access.point.interface.operational.status | The operational status of the access point. | String |
| cisco.access.point.interface.admin.status | The admin status of the access point. | String |
| wireless.access.point.interface.current.channel | The current channel on which an interface under an access point operates. | String |
| wireless.access.point.interface.type | The type of the interface in an access point. | String |
| cisco.access.point.interface.wlan.override | The flag value indicates the status of WLAN override. ‘Enable’ indicates the WLAN override is enabled and ‘Disable’ indicates it is disabled. | String |
| wireless.access.point.interface | The name of the interface. | String |
| wireless.access.point.location | The location of the interface. | String |
| wireless.access.point | The name of the access point | String |
| wireless.access.point.mac.address | The MAC address of the access point | String |
| wireless.access.point.slots | The count of SSID slots in the access point | Count |
| wireless.access.point.group | The name of the access point group | String |
| wireless.access.point.serial.number | The serial number of the access point. | String |
| cisco.access.point.admin.status | The status of the access point. ‘Enable’ indicates that access point is enabled on the controller and ‘Disable’ indicates that the access point is disabled. | String |
| cisco.access.point.operational.status | String | |
| wireless.access.point.ip.address | The IP address of the access point. | String |
| wireless.access.point.model | The model number of the access point. | String |
| wireless.access.point.clients | The number of devices connected to the access point. | Count |
Cisco Wireless Count
| wireless.client | The name/MAC address of the client device. | String |
| cisco.wireless.client.protocol | The protocol used to connect the client to the network. | String |
| wireless.client.ap | The name of the access point. | String |
| wireless.client.snr | The signal to noise ratio of the client device. | Count |
| cisco.wireless.client.association.mode | String | |
| wireless.client.os.type | String | |
| wireless.client.wlan | The name of the wlan. | String |
| wireless.client.channel | The channel connecting the client to the network. | String |
| wireless.client.traffic.received.bytes.rate | Data(in bytes) being transferred into the client per second. | Bytes |
| wireless.client.signal.strength.dbm | The signal strength of the device with reference to the network. | Count |
| wireless.client.traffic.sent.bytes.rate | Data(in bytes) being transferred out of the client per second. | Count |
| wireless.client.packets.rate | Number of packets being transferred in or out of the client per second. | Count |
| wireless.client.interface.type | String | |
| wireless.client.ip.address | The IP address of the client device. | String |
| wireless.client.ap.mac.address | The MAC address of the access point. | String |
| wireless.client.traffic.bytes.rate | Count | |
| wireless.client.ap.ip.address | The IP address of the access point. | String |
| wireless. client.status | String | |
| wireless. client.username | The username of the client. | String |
| wireless.client.uptime.sec | Count | |
| wireless.client.received.packets.rate | The number of packets received by the client per second. | Count |
| wireless.client.sent.packets.rate | The number of packets sent by the client per second. | Rate |
| wireless.client.auth.method | The authentication method used to connect to the network. | String |
Cisco Wireless Rogue AP
| wireless.rogue.client.ssid | The SSID of the rogue client. | String |
| wireless.rogue.client | The name/MAC address of the rogue client. | String |
| cisco.rogue.client.ap.mac.address | The MAC address of the rogue client. | String |
| cisco.rogue.client.state | String | |
| cisco.rogue.client.last.detected | The total time since the device was last detected as rogue. | String |
| cisco.rogue.access.point.name | The name of the rogue access point. | String |
| wireless.rogue.access.point.channel | The channel on which the rogue access point is interfering with the network. | String |
| wireless.rogue.access.point.last.detected | The total time since the access point was last detected as rogue. | String |
| wireless.rogue.access.point.class.type | The class type of the rogue access point. | String |
| wireless.rogue.type | The type of the rogue device. | String |
| cisco.rogue.access.point.state | String | |
| wireless.rogue.access.point.mac.address | The MAC address of the rogue access point. | String |
| cisco.rogue.access.point.clients | The number of client devices connected to the rogue access point. | String |
| wireless.rogue.access.point | The name of the rogue access point. | String |
