ScienceLogic Pricing 2026: Plans, Costs & What You'll Pay

How much does ScienceLogic cost, and what will you actually pay for your setup?

ScienceLogic is a platform for IT monitoring and AIOps. It monitors infrastructure, applications, and cloud services while helping teams automate tasks after an alert.

ScienceLogic publishes its starting prices, but your final cost depends on how many devices you monitor. That count can include physical servers, virtual machines, and network devices.

In this guide, we will break down ScienceLogic pricing, explain how device counts affect the cost, and help you understand what you could pay in 2026.

ScienceLogic Pricing at a Glance

If you are short on time, here is the structure before the detail.

Note: these are list prices from the official ScienceLogic pricing page. Volume discounts and device group pricing are available on request.

The most important thing to know is that everything is priced per device. ScienceLogic calls this a node or managed device, and it covers anything the software can discover and manage.

Network devices cost more than servers. Skylar Compliance starts at $12 per device a month against $5 for Skylar One, so the split between your two device counts matters more than the total.

The gap between Standard and Advanced is small on Skylar One. One extra dollar per device a month adds workflow automation, and few tools charge that little for the step up.

Skylar AI has no published price. Both Skylar Analytics and Skylar Advisor need a conversation with your ScienceLogic team, so the AI layer is the part you cannot budget from the website.

What Is ScienceLogic?

ScienceLogic is an IT operations and observability company. Its platform monitors infrastructure, applications, networks, and cloud services, and uses AI to spot problems and act on them.

It is used by large enterprises and service providers including Rackspace, CDW, DataBank, and World Wide Technology. The company was named a Leader in the Forrester Wave for AIOps Platforms in 2025.

The platform is sold as three product lines. Skylar One handles observability and integration, Skylar Compliance handles network automation and configuration, and Skylar AI adds analytics and guidance on top.

Where it stands out is breadth in one platform. Instead of running separate tools for infrastructure monitoring, network compliance, and automation, you get all three under one license.

The thing to keep in mind is the billing unit. Because everything is priced per device, your cost follows how many things you monitor rather than how much data they produce.

How ScienceLogic Pricing Works

ScienceLogic pricing comes down to three things: which products you need, how many devices you monitor, and which plan level you pick.

The product decides your rate. Skylar One starts at $5 per device a month, Skylar Compliance starts at $12, and Skylar AI is quoted separately.

Your device count decides the bill. Usage is metered, so ScienceLogic measures how many nodes you actually monitor rather than charging for a fixed allowance.

The plan you pick decides your features. Both products come in a Standard plan and an Advanced plan. The Standard plan covers monitoring and integration, while the Advanced plan adds workflow automation on Skylar One and high availability on Skylar Compliance.

What Counts as a Device

The device count is what your whole bill is built on, so it is worth being clear about what ScienceLogic includes.

A node or managed device is any resource the software can discover and manage, or collect metrics about. That covers fault, performance, configuration, and other data.

The definition is broad. Physical machines count, network addressable devices such as routers, switches, and personal computers count, and virtual devices count too.

Containers and serverless resources are charged as well. ScienceLogic offers separate pricing for highly elastic setups, so ask about it if you run a lot of short-lived resources.

ScienceLogic AI Platform Pricing by Product

Each product has its own rate and its own plan levels. Here they are, one at a time, with the list prices from the ScienceLogic pricing page.

Skylar One Pricing

Skylar One is the main observability product and the one most teams start with. It comes in two plans, and both are priced per device per month.

Note: contact ScienceLogic for device group pricing, which applies when you monitor large numbers of similar devices.

The Skylar One Standard plan covers the monitoring itself. You get PowerPacks, Skylar One Studio, hybrid cloud monitoring, infrastructure and application observability, more than 400 ready-made integrations, event management, business service visibility, behavioral correlation, and SSO with API access.

The Skylar One Advanced plan adds automation for one dollar more. That brings Skylar Automation, SyncPacks, more than 100 ready-made workflow automations, and a low-code designer for building your own.

Agents are included in both plans. ScienceLogic states that Skylar One Agents come as part of standard pricing for on-premises and SaaS setups, so there is no separate agent charge.

Skylar Compliance Pricing

Skylar Compliance handles network device configuration and compliance. It costs more per device than Skylar One because it manages network gear rather than watching servers.

Note: contact ScienceLogic for volume discounts and enterprise pricing on this product.

The Skylar Compliance Standard plan covers configuration management. You get configuration backup with one-click recovery, change detection and automation, compliance auditing and reporting, more than 100 vendor-native integrations, and SSO with API access.

The Skylar Compliance Advanced plan is about staying up. It syncs a primary and a secondary appliance, then fails over automatically so your compliance work continues if one goes down.

That step costs 67 percent more per device. Going from $12 on the Standard plan to $20 on the Advanced plan is a large rise for high availability alone, so check whether you need it on every device or only some.

Skylar AI Pricing

Skylar AI is the layer that adds prediction and guidance on top of the monitoring. Neither product in it has a published price.

Skylar Analytics covers autonomous data visualization and exploration. It includes predictive alerting, anomaly detection, ODBC access, and visualizations.

Skylar Advisor covers guidance rather than data. It gives you advisories, knowledge management and sharing, and a conversational interface for asking questions about your environment.

For both, ScienceLogic asks you to contact your account team. So if AI is central to why you are looking at the platform, expect a sales conversation before you see a figure.

What ScienceLogic Costs at Different Sizes

The per device rate is only the start. Your device count, your product mix, and any volume discount all change the total. The figures below are estimates built from the published list prices, so your own numbers will vary.

Note: these figures use the published list rates before any volume discount. Skylar AI, disaster recovery, and overage charges are billed on top.

The small-team figure covers 100 devices at $5 each on the Skylar One Standard plan, coming to $6,000 a year. Moving those same devices to the Advanced plan for workflow automation takes it to $7,200.

The growing-team figure covers 500 devices at $5 each, or $30,000 a year. At this size, ScienceLogic offers volume pricing, so the list rate is a starting point rather than a final quote.

The mixed figure shows what happens when you add Skylar Compliance. Five hundred devices on Skylar One plus 100 network devices on Compliance comes to $3,700 a month, or $44,400 a year, because those 100 network devices cost more than double the rest.

What Increases Your ScienceLogic Costs

Five things raise a ScienceLogic bill above the list rates.

• Device count: Everything is priced per device, so every server, router, switch, and virtual machine you monitor adds to the total. This is the main thing that moves your bill.

• Network devices on Skylar Compliance: At $12 per device against $5 for Skylar One, network gear costs more than double, so a large network raises the bill faster than adding servers.

• High availability: The Skylar Compliance Advanced plan costs $20 per device against $12 on the Standard plan, and disaster recovery is charged on top of that as a separate cost.

• Usage bursts: ScienceLogic assesses your average daily usage periodically, and anything above the license you bought is invoiced afterwards at an agreed rate.

• Skylar AI: The analytics and advisor products are quoted separately, so the AI layer sits outside every figure published on the pricing page.

In the end, your ScienceLogic bill comes down to how many devices you monitor, how many of them are network devices, and whether you need the AI products. It works best for teams that count their devices carefully before asking for a quote.

ScienceLogic User Reviews: What Teams Actually Say

We went through ScienceLogic reviews on G2, Gartner Peer Insights, and other review sites to see what users actually think about the platform. The feedback is largely positive on breadth and automation, with the learning curve as the common complaint.

Users often praise how much it covers. Reviewers say they replaced several separate tools with one platform, and that the more than 400 ready-made integrations meant less work connecting things up.

The automation gets praise too. Teams like that they can act on an alert rather than only see it, and that building workflows does not require heavy coding.

The main complaint is the setup effort. Reviewers describe a steep learning curve at the start and say the platform takes proper configuration before it delivers what it promises.

Cost comes up as the other theme. Because pricing is per device, reviewers with large setups say the total climbs quickly and needs watching as they add devices.

These are the patterns we found in user reviews. Your own experience can vary based on your device count and how much automation you build.

Top 5 ScienceLogic Alternatives to Consider

The table below lays out five alternatives side by side, so you can match one to your need.

Motadata handles network monitoring, infrastructure, flows, and device health, along with logs, metrics, and traces, so you do not license network and server monitoring separately.

There is also less to set up. Motadata runs in the cloud or on your own servers, with a modern interface and a guided setup.

The AI comes with the platform. It spots unusual patterns and links related alerts on its own, with no training needed and no separate quote.

Our roundup of the best observability tools compares the wider market.

Is ScienceLogic the Right Choice?

ScienceLogic is a strong fit for large organizations that want monitoring, network compliance, and automation on one platform, and that can invest in the setup.

ScienceLogic Works Best For

ScienceLogic is a strong fit for:

• Large enterprises replacing several separate monitoring tools

• Managed service providers monitoring many customer environments

• Teams that want automation to act on alerts, not just report them

• Organizations that need on-premises, cloud, SaaS, or hybrid deployment

• Government and regulated buyers who need FedRAMP coverage

• Companies that want published starting rates before a sales call

• Teams with the skill and time to configure a large platform properly

These are the teams ScienceLogic fits best. Its breadth and automation work well for organizations large enough to use most of the platform.

ScienceLogic May Not Be the Right Fit For

The limits of ScienceLogic are mostly about cost planning and setup effort, not what it can do. Because everything is priced per device and the AI layer is quoted separately, it can fall short for some teams.

ScienceLogic may not be enough for:

• Teams that want one price rather than a figure that grows with every device

• Buyers who need AI pricing published rather than quoted

• Small teams that would use a fraction of the platform

• Organizations with many network devices, where the $12 rate adds up fast

• Teams that need to be running in days rather than weeks

• Companies that want high availability without a 67 percent price rise

• Buyers who want one license covering monitoring and network compliance together

So it comes down to what you need. If you monitor a lot of devices and want monitoring, compliance, and automation from one vendor, ScienceLogic is a capable choice. If you want one clear price with AI included, take a look at Motadata.

Conclusion

ScienceLogic gives you a clear starting price, but the final number depends on your setup.

The number and type of devices you monitor can change the cost, and products like Skylar AI require a custom quote.

Before you make a decision, map out your infrastructure and ask for pricing based on your actual requirements.

If you want to explore an alternative that brings infrastructure monitoring and IT operations together, take a look at Motadata.

FAQs