Auvik Pricing in 2026: Per-Device Costs, Tiers, and Alternatives

Auvik will not show you a price until you talk to sales. Its own pricing page says this, and warns that other sites and AI tools list the wrong numbers.

So you have to piece the pricing together yourself. The way it works is public, but the actual rate per device only comes from a quote.

The good news is that the model is easy to follow. Auvik charges per device, and only some of your devices count toward the bill.

This guide shows how the pricing works, which devices you pay for and which are free, what teams say they pay, and where Motadata ObserveOps fits.

The upside is the free devices. Access points, printers, and power supplies are watched for free, so you pay for your main network gear, not every device.

The downside is that you cannot plan the cost easily. Rates are quote-based and change with device type and count, so you cannot work out your bill from a web page.

So here is how Auvik pricing works in 2026, and how it compares to other tools. Let's get into it.

A Note on These Prices

Auvik does not share a price list. Its pricing page is a form to request a quote, and Auvik says plainly that figures on other sites are often wrong.

So the dollar figures in this guide come from outside sources and reported buyer data, not from Auvik. Use them to plan, not as exact quotes.

Note: These are estimates based on reported third-party data and Auvik's published pricing model. Exact pricing requires a custom quote and will vary based on your device mix, volume, and terms. For accurate figures, use Auvik's pricing page and request a quote.

Auvik Pricing at a Glance

Short on time? Here is how Auvik pricing is structured.

One detail matters most. You pay only for billable devices, and Auvik watches many other devices for free, so the number you pay for is much smaller than your total device count.

Two things the table cannot show. The rates are estimates, since Auvik does not share them, so your quote may be different.

The other is that the two plans, Essentials and Performance, bill the same way but include different features, so the plan you pick changes the rate per device.

If per-device billing that grows with your network makes it hard to plan, Motadata ObserveOps is worth a look. It is priced for your whole setup, not per device. You can book an ObserveOps demo and try it on your own network first.

What is Auvik?

Auvik is a cloud-based tool for managing and watching networks. It finds, maps, and tracks your network on its own, and it is used by MSPs and in-house IT teams.

It is known for automatic network maps, live topology, config backups, and traffic analysis. It runs in the cloud only, with no option to host it yourself.

The platform covers network monitoring, server monitoring, endpoint monitoring, and SaaS management, and every plan includes unlimited users.

Its main strength is finding and mapping your network for you. Auvik draws a live map in minutes, and reviewers name this as the top reason they picked it.

One point on the model. Auvik is made for networks, so it bills on network, infrastructure, and edge devices, and watches many other devices for free.

How Auvik Pricing Works?

Auvik pricing comes down to one idea: you pay per billable device each month. The rest depends on which devices count and which do not.

Auvik finds your network and sorts devices into groups. Network and infrastructure devices are billable. Many other devices are watched for free.

The rate per device depends on the type and how many you have. Network devices cost the most, infrastructure and edge devices cost less, and rates drop as your device count goes up.

Your plan sets the features. Essentials covers the core monitoring and mapping. Performance adds deeper traffic analysis and more advanced features at a higher rate per device.

Which Devices Are Billable?

This is what decides your bill, so it helps to be exact.

Billable devices are your main network gear: switches, routers, firewalls, and controllers. Servers, hypervisors, and edge devices count too.

Free devices, watched at no cost, include wireless access points, printers, power supplies, network storage, workstations, and other endpoints.

The difference is big. Reports show a 50-user network often has just 3 or 4 billable network devices and 2 or 3 infrastructure devices, with 50 or more devices watched for free.

Auvik Pricing: What Teams Report Paying

Auvik shares no rates, so the figures below come from outside sources, not Auvik. Treat them as rough ranges for planning.

Reported Per-Device Rates

Outside sources report these ranges for billable devices. Confirm them against a proper quote, since they do not come from Auvik.

Reports say the rate per device drops as you add more, with lower rates past 100, 250, and 500 devices, and bigger discounts from around 500 devices.

Reported Monthly Totals

Because you only pay for some devices, the totals below are lower than your full device count would suggest.

These totals cover billable devices and your plan, not every device on the network. A network packed with switches and firewalls costs more than the raw count suggests.

Auvik Tiers Explained

Auvik has two plans. Both bill per device and include the core platform. The difference is how many features you get.

Essentials is the base plan: it finds and maps your network, tracks inventory, monitors devices and sends alerts, backs up configs, and gives remote access across network, infrastructure, and edge devices.

Performance adds the deeper tools: full traffic analysis and flow monitoring, more detailed analytics, and the advanced troubleshooting that larger network teams need.

The 14-day free trial gives you full access to Performance, so you can test alerts, mapping, and flow analysis before you pick a plan.

What Auvik Costs in Practice

A rate per device does not tell you your bill, since only some devices count. Here are two worked examples using reported rates.

These use reported figures, not Auvik quotes, so treat them as rough models.

Note: These are estimates based on reported third-party data and Auvik's published pricing model. Exact pricing requires a custom quote and will vary based on your device mix, volume, and terms.

Small Business, 50 Users

A small office with 50 users usually has a small core network, so the billable count is low even when total devices are high.

The point is that 50 users does not mean 50 billable devices. Reports show 6 or 7 billable devices for a network that size, with the rest watched for free.

Mid-Sized Network, 500 Devices

A bigger or multi-site network has far more billable gear, so the total goes up with switches, routers, and firewalls across sites.

At this size, reports say the rate per device drops, but the number of billable network devices is what sets the total.

The same holds at both sizes. Auvik cost follows billable network and infrastructure devices, not your total count, so a small core network keeps the bill low.

What Increases Your Auvik Costs

Five things raise an Auvik bill higher than a first estimate suggests.

• More billable devices: Every new switch, router, firewall, server, or hypervisor adds to the count, so a growing network raises the bill.

• Device mix: Network devices cost the most, so a network with lots of switches and firewalls costs more than one with fewer, larger devices.

• Plan choice: Performance costs more per device than Essentials, so teams that need traffic analysis pay a higher rate on every billable device.

• More sites: More sites usually mean more billable network gear, so multi-site MSPs and larger teams see the count grow fast.

• Setup and training: Reports say setup and training can add a few hundred to a couple of thousand dollars, based on how complex your network is.

The point is simple. Auvik cost follows your billable network gear, so teams with a small core network and lots of free-watched devices pay less.

Auvik User Reviews: What Teams Actually Say

This section is based on our review of Auvik feedback on G2, Capterra, and TrustRadius. Auvik scores well on those sites for ease of use and mapping.

The praise is consistent. The live network map and automatic discovery lead the comments, and reviewers often name the map as why they chose Auvik.

The all-in-one setup is a second theme. Reviewers like having monitoring, mapping, config backups, and remote access in one tool instead of several.

Speed is a third. Auvik is called quick to set up, with a network mapped in minutes and value shown to clients fast.

The main complaint is cost at scale. Reviewers say per-device billing adds up on large networks, which can cut into MSP margins on price-sensitive clients.

The learning curve is a second theme, since collectors, sites, and device tiers take time to learn. A few reviewers also want more flexible reporting.

These are common review patterns, not hard facts, so your own results depend on your network size and device mix.

Top Auvik Alternatives to Consider

If per-device billing, quote-based pricing, or the network-only focus pushed you to look around, here is how the main options compare.

Our pick is Motadata ObserveOps. It covers network and infrastructure monitoring plus logs, metrics, and traces on one quote, with no billable-device count, and it can run on-premises where Auvik is cloud only.

Why Motadata ObserveOps Leads the List

Auvik counts billable devices, so a bigger or denser network raises your bill device by device. Motadata ObserveOps is priced for your whole setup instead, so watching more does not add a per-device charge.

It also covers more than Auvik. Auvik is made for networks. ObserveOps adds infrastructure monitoring, logs, metrics, and traces, so you do not need a separate tool for the rest.

Its network monitoring covers SNMP, flows, and device health, and the included AI spots problems and groups alerts with no setup or training.

Deployment is the other difference. Auvik is cloud only, while ObserveOps runs in the cloud or on your own servers, which helps teams with data rules.

Is Auvik the Right Choice?

Auvik is a good fit for MSPs and IT teams that want fast, automatic network mapping and monitoring, and whose billable device count stays small.

It also suits teams that want a live map and all-in-one network management over a wider tool, and that are fine with cloud-only setup.

It is a weaker fit for large or dense networks, since per-device billing on many switches and firewalls raises the cost fast.

It is also weaker for teams that need logs, APM, or on-premises setup, since Auvik is made for networks and runs in the cloud only, so full coverage means adding other tools.

That is the choice. If you want automatic network monitoring on a per-device plan, Auvik is a capable and popular tool.

If you want monitoring without per-device billing, one tool across network and observability, or an on-premises option, ObserveOps is worth a look. Our guide to choosing a network monitoring tool covers what to weigh as you grow.

Conclusion

The main point on Auvik pricing is that the model is simple but the number is hidden.

Per billable device, per month, with many devices watched free, is easy to follow. But since Auvik shares no rates, the true figure only comes from a quote.

That is not a reason to skip it. For a team with a small core network that loves the live map, Auvik is a solid pick.

It is a reason to count your billable devices before you ask for a quote, since network gear drives the bill while your access points and printers do not.

If you want to see how one whole-setup price compares against your own network, you can start a free ObserveOps trial and run a live workload through it.

FAQs