Coralogix Pricing in 2026: How Much Does It Cost?

If you are looking for observability tools, you have probably come across Coralogix.

You may have already checked its website for the features, plans, and pricing.

But if you are still wondering how much Coralogix would actually cost for your setup, you are not alone.

Coralogix charges based on the amount of data you send, so the pricing page does not give you a single number to work with.

Your cost depends on how much data you send and how long you keep it.

Coralogix also uses a "units" system, which can make the pricing harder to work out.

In this guide, we will break down Coralogix pricing in simple terms and help you get a better idea of what you could pay based on your usage.

Let's get started.

Coralogix Pricing at a Glance

If you are short on time, here is the shape of it before the detail.

Note: rates are per GB ingested. One unit equals $1.50 of usage across any data type.

Coralogix prices by the data you send, not by hosts or users. So a busy app that sends a lot of data costs more than a large but quiet one, no matter how many servers you run.

Every account comes with the same base perks. You get 24/7 human support, unlimited data sources, unlimited users and hosts, and a daily quota that renews each day, with no extra charge for any of it.

The rate you pay per GB also changes with the pipeline you pick. Coralogix lets you route data into different priority tiers, and cheaper tiers cost far less per GB than the top one.

What is Coralogix?

Coralogix is a full-stack observability platform. It handles logs, metrics, traces, and security data in one place, so engineering teams can watch and debug their systems as things happen.

It was founded in 2015 and has grown from a log analytics tool into a full observability platform. It is known for a streaming model that processes data as it arrives, which lets it run alerts and spot problems before the data is even stored.

Coralogix covers a broad set of needs in one tool. You get log analytics, metrics monitoring, distributed tracing, AI observability, and security monitoring, all under one query language called DataPrime.

Teams like it for its low cost and its 24/7 human support, which comes with every account. It is often chosen as a cheaper option than Datadog or Splunk for teams that send a lot of data.

The one part that takes some getting used to is the unit model. Because Coralogix charges by data and routes it through pipelines, your cost depends on how much you send and how you set it up, not on a flat per-seat fee.

How Coralogix Pricing Works

Coralogix pricing rests on three ideas: you pay for data, that data is measured in units, and you route it through pipelines that each have their own rate.

You pay for the data you send. There is no charge per host, per user, or per seat. Logs, traces, and metrics each have a published per-GB rate, and you pay for the volume you ingest.

Units are how Coralogix measures that spend. One unit equals $1.50 of usage, and it works across logs, metrics, traces, and AI. This lets you spend your quota on whatever data type you need on a given day, without buying each one separately.

Pipelines set the rate per GB. Coralogix sorts your data into priority tiers, and each tier has a different price, so where you send your data changes what you pay for it.

How the Units System Works

Coralogix uses units as a kind of shared currency, and this is the part worth understanding early.

One unit is worth $1.50 of usage, and you can spend it on any data type. For example, one unit could cover about 1.3 GB of frequent-search logs, or 30 GB of metrics, or 2 GB of tracing, depending on where you send it.

This flexible setup means you do not have to plan your usage in advance. Your daily quota can go toward logs one day and metrics the next, and Coralogix works out the units as you go.

Coralogix Pricing by Data Pipeline

The pipelines are where Coralogix pricing gets interesting, and where the savings live. Every piece of data you send goes into one of a few priority tiers, and each tier charges a different rate per GB.

Note: these are reported log rates by pipeline. Traces and metrics follow the same tiered idea at their own rates.

The Frequent Search pipeline is the most expensive, since it keeps your data indexed and ready for fast queries. The Monitoring pipeline is cheaper and suits data you watch on dashboards but rarely search directly. The Compliance pipeline is the cheapest, meant for data you must keep but almost never look at.

This is the heart of the Coralogix pricing model. Its TCO Optimizer lets you route each type of data to the right pipeline, so you only pay top rates for the data that needs fast access. Coralogix reports that customers who use this routing cut their costs by 40 to 70 percent.

Coralogix Free Tier and Retention

Coralogix has a free tier, which is worth knowing about before you pay. It gives you 5 GB of data per month across logs, metrics, and traces, with limited security features.

The free tier suits a small project or a trial run. Most production teams pass the 5 GB limit quickly and move to the pay-as-you-go model.

Note: retention is effectively unlimited, since Coralogix can archive data to your own cloud storage bucket.

Retention is another part of the pricing to understand. Coralogix stores long-term data in your own cloud bucket, so you can keep as much history as you want. You still pay your cloud provider a small data-out fee to move the data, which is easy to forget when you budget.

What Coralogix Costs at Different Sizes

The per-GB rates are only the start. Your true cost depends on your data volume, your retention, and how you route your pipelines. The figures below are reported estimates, so your own numbers will vary.

Note: These figures are estimates based on information available online, including third-party listings. Actual costs may vary based on your data volume, pipelines, retention, add-ons, support, and other requirements.

The small-team cost is the free tier or a light pay-as-you-go setup. As long as you stay near the 5 GB free limit or send only a little data each day, your cost stays very low.

The growing-team cost covers roughly 100 to 150 GB of data a day across a mix of pipelines. At the blended $0.42 per GB rate, that works out to about $15,000 to $23,000 a year, and good pipeline routing can bring it down further.

The enterprise cost covers high data volume of 500 GB a day or more, across many pipelines, with AI and security added. Reported deal data puts the average Coralogix contract around $71,000 a year, though this swings widely with your data volume.

Tip: For a wider view of the options, our guide to observability tools is a helpful next read.

What Increases Your Coralogix Costs

Four things raise your Coralogix bill above the base rates.

• Data volume: you pay by the GB, so every new service, extra log line, or traffic spike adds to your bill. This is the biggest factor by far.

• Pipeline choice: sending everything to the Frequent Search tier costs the most. Routing data to cheaper tiers is what keeps the bill down, so poor routing raises it.

• Retention and data-out fees: long retention in your own bucket is cheap to store, but you still pay your cloud provider to move the data out, which adds up at scale.

• AI, support, and services: AI evaluations, professional services, and onboarding are billed on top of your data usage, so heavy AI use or a big rollout costs more.

So your Coralogix cost comes down to how much data you send and how well you route it. It works best for teams that sort their data into the right pipelines and watch their volume.

Coralogix User Reviews: What Teams Actually Say

We went through Coralogix reviews on G2, Gartner Peer Insights, and other review sites to see what users actually think about the platform. The feedback is strongly positive, with a 4.6 out of 5 rating on G2. The query language and setup are the main sticking points.

Users often praise the 24/7 human support. Reviewers mention that they reach a support engineer quickly, which they value when a critical system is having trouble.

The cost savings against Datadog also get plenty of praise. Many reviewers moved to Coralogix to cut their observability bill, and they say the pipeline routing genuinely lowers what they pay.

The biggest complaint is the DataPrime query language. Power users like how flexible it is, but newcomers say it takes time to learn and is the hardest part of getting started.

Setup and navigation are the other themes. Some reviewers find the interface complex and the integration setup fiddly, especially in the early days.

These are the patterns we found in user reviews. Your own experience can vary based on your data volume and how comfortable your team is with a query language.

Top Coralogix Alternatives to Consider

Coralogix is strong and low-cost, but it does not suit everyone. The usage-based bill can be hard to plan, and the query language takes time to learn. The table below compares five well-known alternatives, so you can see how each one measures up.

Is Coralogix the Right Choice?

Coralogix is a strong fit for teams that send a lot of data, want to cut their observability bill, and are happy to work with a usage-based, pipeline-driven model.

Coralogix Works Best For

Coralogix is a strong fit for:

1. Teams that send high volumes of logs, metrics, and traces

2. Companies looking to cut their observability bill against Datadog or Splunk

3. Engineering teams that want logs, metrics, and traces in one platform

4. Organizations that value 24/7 human support at no extra cost

5. Teams that want to keep long-term data in their own cloud bucket

6. Businesses with the skill to route data across pipelines for savings

7. Teams that want no per-host or per-user fees

These are the teams that get the most out of Coralogix. Its per-GB model and pipeline routing reward teams that send a lot of data and take the time to set it up well.

Coralogix May Not Be the Right Fit For

Coralogix's weak spots are mostly about planning and setup, not power. Because it charges by data and leans on a query language, the cost and the learning curve can both be hurdles.

Coralogix may not be enough for:

1. Teams that want one clear price they can plan in advance

2. Buyers who find usage-based, per-GB pricing hard to forecast

3. Small teams that would rather avoid a query language

4. Organizations that want network and infrastructure monitoring in the same tool

5. Teams without the time to route pipelines and manage retention

6. Buyers who want AI and correlation included across the platform

7. Teams that want app, network, and infrastructure coverage in one price

So it comes down to what you need. If low-cost, high-volume observability suits you, Coralogix is a strong choice. If you want one clear price, wider coverage, and AI included, take a look at Motadata.

Conclusion

Here is the short version of Coralogix pricing. The per-GB rates are clear and public, but your true bill depends on how much data you send and how well you route it.

The rates are refreshing to see up front. Logs at $0.42, traces at $0.16, and metrics at $0.06 per GB are all on the website, and the units system lets you spend across data types without buying each one separately.

The catch is everything the rates do not show. Data volume, pipeline choice, retention, and data-out fees all shape your final cost, and you only learn your true number once you model your own usage.

This is not a reason to skip it. For a team that sends a lot of data and takes the time to route it well, Coralogix is one of the most cost-friendly observability platforms around.

It just means you should map your data volume, pipelines, and retention before you commit. The per-GB rates alone will not show you the full total.

FAQs