Juniper
Seamlessly integrate Juniper Switch with Motadata AIOps to gain real-time network performance visibility, proactive monitoring, and optimized management of switch health, traffic, and interface utilization.
Overview
Juniper Switch, the reliable and high-performance network switch solutions by Juniper Networks, seamlessly integrate with Motadata AIOps to provide comprehensive monitoring and management capabilities. With this integration, organizations gain real-time visibility into the performance and health of their Juniper Switches. Monitor critical network switch metrics such as port utilization, link status, and traffic patterns to ensure smooth and efficient network operation.
Prerequisites
Refer Adding network devices for monitoring to understand the prerequisites necessary for monitoring a network device.
List of Supported KPIs
Metrics | Description | Type |
|---|---|---|
ping.min.latency.ms | Minimum latency (in milliseconds) observed during ping | Count |
ping.received.packets | Number of packets received during ping | Count |
ping.lost.packets | Number of packets lost during ping | Count |
ping.max.latency.ms | Maximum latency (in milliseconds) observed during ping | Count |
object.target | Target object identifier | String |
ping.sent.packets | Number of packets sent during ping | Count |
ping.packet.lost.percent | Percentage of packet loss during ping | Percent |
ping.latency.ms | Average latency (in milliseconds) observed during ping | Count |
system.oid | System Object Identifier | String |
started.time.sec | Uptime in Seconds for the monitor | Count |
started.time | Uptime of the monitor | String |
object.name | Name of the monitor | String |
system.location | Location of the monitor | String |
system.description | Description of the monitor | String |
correlation.metrics | Correlation metrics between network connections | String |
network.connection.tcp.connections | Number of TCP connections | Count |
network.connection.udp.connections | Number of UDP connections | Count |
network.connection.udp.error.segments | Number of UDP error segments | Count |
network.connection.tcp.error.segments | Number of TCP error segments | Count |
network.connection.tcp.retransmitted.segments | Number of TCP retransmitted segments | Count |
destination.ip | Destination IP address | String |
destination.port | Destination port number | Count |
network.connection.protocol | Protocol used for network connection | Count |
network.connection.state | State of the network connection | String |
source.ip | Source IP address | String |
source.port | Source port number | Count |
interface.sent.discard.packets | Number of discarded packets sent on the interface | Count |
interface.in.packets | Number of incoming packets on the interface | Count |
interface.packets | Number of packets on the interface | Count |
interface.error.packets | Number of error packets on the interface | Count |
interface.sent.error.packets | Number of error packets sent on the interface | Count |
interface.received.discard.packets | Number of discarded packets received on the interface | Count |
interface.received.octets | Number of octets received on the interface | Count |
interface.bit.type | Bit type of the interface | Count |
status | Status of the interface | String |
interface.out.packets | Number of outgoing packets on the interface | Count |
interface.operational.status | Operational status of the interface | String |
interface.admin.status | Admin status of the interface | Count |
interface.sent.octets | Number of octets sent on the interface | Count |
interface.last.change | Last change of the interface | String |
interface.received.error.packets | Number of error packets received on the interface | Count |
interface.discard.packets | Number of discarded packets on the interface | Count |
started.time | Uptime of the interface | String |
started.time.sec | Uptime in seconds of the interface | String |
system.cpu.percent | The CPU utilization percentage of the device. | percentage |
system.memory.used.percent | The percentage of memory used in the device. | percentage |
fan.sensor | The fan sensor status. | string |
fan.sensor.status | The status of the fan sensor (e.g., Running, Ready, Down). | string |
power.supply.sensor | The power supply sensor status. | string |
power.supply.sensor.status | The status of the power supply sensor (e.g., Running, Down, Standby). | string |
juniper.fpc | The status of the Flexible PIC Concentrators (FPC) in the device. | string |
juniper.fpc.state | The state of the FPC (e.g., Running, Ready, Down). | string |
juniper.fpc.temperature.reading.celsius | The temperature reading of the FPC in degrees Celsius. | count |
juniper.fru | The status of the Field Replaceable Units (FRU) in the device. | string |
juniper.fru.type | The type of the FRU (e.g., Clock Generator, Switching Forwarding Module). | string |
juniper.fru.state | The state of the FRU (e.g., Present, Online, Offline). | string |
juniper.fru.temperature.celsius | The temperature of the FRU in degrees Celsius. | count |
juniper.fru.uptime | The uptime of the FRU in seconds. | count |
juniper.fru.chassis | The chassis of the FRU. | string |
juniper.fru.chassis.description | Description of the FRU chassis. | string |
juniper.routing.engine.1.cpu.percent | The CPU utilization percentage of Routing Engine 1. | percentage |
juniper.routing.engine.2.cpu.percent | The CPU utilization percentage of Routing Engine 2. | percentage |
juniper.routing.engine.1.memory.used.percent | The percentage of memory used in Routing Engine 1. | percentage |
juniper.routing.engine.2.memory.used.percent | The percentage of memory used in Routing Engine 2. | percentage |
juniper.routing.engine.1.temperature.reading.celcius | The temperature reading of Routing Engine 1 in degrees Celsius. | count |
juniper.routing.engine.2.temperature.reading.celcius | The temperature reading of Routing Engine 2 in degrees Celsius. | count |
juniper.virtual.chassis | The virtual chassis identifier. | string |
juniper.virtual.chassis.role | The role of the device in the virtual chassis (e.g., Master, Backup, Linecard). | string |
juniper.virtual.chassis.mac.address | The MAC address of the virtual chassis. | string |
juniper.virtual.chassis.version | The version of the virtual chassis. | string |
juniper.virtual.chassis.priority | The priority of the device in the virtual chassis. | count |
juniper.virtual.chassis.started.time.seconds | The time since the virtual chassis started in seconds. | count |
juniper.virtual.chassis.model | The model of the virtual chassis. | string |
juniper.virtual.chassis.location | The location of the virtual chassis. | string |
system.model | The model of the SNMP device. | string |
system.serial.no | The serial number of the SNMP device. | string |
vlan.name | The name of the VLAN. | String |
vlan.status | The status of the VLAN. | String |
vlan | The VLAN identifier. | String |
vlan.ports | The list of ports associated with the VLAN. | String |
vlan.port | The specific port associated with the VLAN. | String |
Explore More Integrations
Browse our comprehensive integrations catalog to discover all supported platforms and services.