D-Link Router
Seamlessly integrate D-Link Router with Motadata AIOps to gain real-time network performance visibility, proactive monitoring, and optimized routing efficiency across your infrastructure.
Overview
D-Link Router, the reliable and user-friendly router solutions by D-Link Corporation, seamlessly integrate with Motadata AIOps to provide comprehensive monitoring and management capabilities. With this integration, organizations gain real-time visibility into the performance and health of their D-Link Routers. Monitor critical router metrics such as interface utilization, routing table status, and packet forwarding to ensure smooth and efficient network routing.
Prerequisites
Refer Adding network devices for monitoring to understand the prerequisites necessary for monitoring a network device.
List of Supported KPIs
Metrics | Description | Type |
|---|---|---|
ping.min.latency.ms | Minimum latency (in milliseconds) observed during ping | Count |
ping.received.packets | Number of packets received during ping | Count |
ping.lost.packets | Number of packets lost during ping | Count |
ping.max.latency.ms | Maximum latency (in milliseconds) observed during ping | Count |
object.target | Target object identifier | String |
ping.sent.packets | Number of packets sent during ping | Count |
ping.packet.lost.percent | Percentage of packet loss during ping | Percent |
ping.latency.ms | Average latency (in milliseconds) observed during ping | Count |
system.oid | System Object Identifier | String |
started.time.sec | Uptime in Seconds for the monitor | Count |
started.time | Uptime of the monitor | String |
object.name | Name of the monitor | String |
system.location | Location of the monitor | String |
system.description | Description of the monitor | String |
correlation.metrics | Correlation metrics between network connections | String |
network.connection.tcp.connections | Number of TCP connections | Count |
network.connection.udp.connections | Number of UDP connections | Count |
network.connection.udp.error.segments | Number of UDP error segments | Count |
network.connection.tcp.error.segments | Number of TCP error segments | Count |
network.connection.tcp.retransmitted.segments | Number of TCP retransmitted segments | Count |
destination.ip | Destination IP address | String |
destination.port | Destination port number | Count |
network.connection.protocol | Protocol used for network connection | Count |
network.connection.state | State of the network connection | String |
source.ip | Source IP address | String |
source.port | Source port number | Count |
interface.sent.discard.packets | Number of discarded packets sent on the interface | Count |
interface.in.packets | Number of incoming packets on the interface | Count |
interface.packets | Number of packets on the interface | Count |
interface.error.packets | Number of error packets on the interface | Count |
interface.sent.error.packets | Number of error packets sent on the interface | Count |
interface.received.discard.packets | Number of discarded packets received on the interface | Count |
interface.received.octets | Number of octets received on the interface | Count |
interface.bit.type | Bit type of the interface | Count |
status | Status of the interface | String |
interface.out.packets | Number of outgoing packets on the interface | Count |
interface.operational.status | Operational status of the interface | String |
interface.admin.status | Admin status of the interface | Count |
interface.sent.octets | Number of octets sent on the interface | Count |
interface.last.change | Last change of the interface | String |
interface.received.error.packets | Number of error packets received on the interface | Count |
interface.discard.packets | Number of discarded packets on the interface | Count |
started.time | Uptime of the interface | String |
started.time.sec | Uptime in seconds of the interface | String |
fan | Information about the fan. | String |
fan.unit.id | The ID of the fan unit. | String |
fan.description | The description of the fan. | String |
fan.status | The status of the fan. | String |
system.switch.name | The name of the switch. | String |
system.hardware.version | The hardware version of the switch. | String |
system.firmware.version | The firmware version of the switch. | String |
system.fan.state | The state of the fan in the system. | String |
power.supply | Information about the power supply. | String |
power.supply.unit.id | The ID of the power supply unit. | String |
power.supply.description | The description of the power supply. | String |
power.supply.used | The amount of power supply used. | String |
power.supply.max | The maximum power supply capacity. | String |
power.supply.status | The status of the power supply. | String |
temperature | Information about the temperature. | String |
temperature.unit.id | The ID of the temperature unit. | String |
temperature.description | The description of the temperature. | String |
temperature.measure | The measured temperature value. | String |
temperature.status | The status of the temperature. | String |
system.memory | Information about the memory. | String |
system.memory.type | The type of memory in the system. | String |
system.memory.total | The total memory capacity in the system. | String |
system.memory.used | The used memory in the system. | String |
system.memory.available | The available memory in the system. | String |
system.memory.used.percent | The percentage of used memory in the system. | String |
system.cpu | Information about the CPU. | String |
system.cpu.id | The ID of the CPU. | String |
system.cpu.percent | The percentage of CPU usage. | String |
system.1min.avg.cpu.percent | The 1-minute average CPU usage percentage. | String |
system.5min.avg.cpu.percent | The 5-minute average CPU usage percentage. | String |
bgp.peer | The BGP peer identifier or name. | String |
bgp.peer.remote.as | The remote AS number associated with the BGP peer. | Count |
bgp.peer.status | The status of the BGP peer (e.g., up, down). | String |
bgp.local.peer.address | The local IP address of the BGP peer. | String |
bgp.remote.peer.address | The remote IP address of the BGP peer. | String |
bgp.peer.time | The time when the BGP peer was established. | String |
bgp.peer.updated.time | The time when the BGP peer status was last updated. | String |
isis.neighbour.last.up.time | The last time the ISIS neighbour came up. | String |
isis.neighbour.hold.time | The hold time of the ISIS neighbour. | String |
isis.neighbour.system.type | The system type of the ISIS neighbour. | String |
isis.neighbour.3way.state | The 3-way state of the ISIS neighbour. | String |
isis.neighbour.state | The state of the ISIS neighbour. | String |
isis.neighbour | The identifier or name of the ISIS neighbour. | String |
isis.neighbour.protocol | The protocol used by the ISIS neighbour. | String |
ospf.neighbour.remote.as | The remote AS number associated with the OSPF neighbour. | String |
ospf.neighbour.status | The status of the OSPF neighbour (e.g., up, down). | String |
ospf.neighbour | The identifier or name of the OSPF neighbour. | String |
ip.route | The IP route entry. | String |
ip.route.subnet.mask | The subnet mask associated with the IP route. | String |
ip.route.last.updated.sec | The time in seconds since the IP route was last updated. | Count |
ip.route.protocol | The routing protocol associated with the IP route. | String |
ip.route.metric | The metric value of the IP route. | String |
ip.route.type | The type of IP route (e.g., static, dynamic). | String |
ip.route.next.hop | The next-hop IP address for the IP route. | String |
ip.route.last.updated | The last time the IP route was updated. | String |
ip.routing.type | The type of IP routing (e.g., unicast, multicast). | String |
ip.route.interface.index | The index of the network interface associated with the IP route. | Count |
Explore More Integrations
Browse our comprehensive integrations catalog to discover all supported platforms and services.